top of page

Grundkurs

Offentlig·6 medlemmar

Vagcom4091usbdriverdownload


How to Install and Use VAG-COM 409.1 KKL USB Cable on Windows




VAG-COM 409.1 KKL USB cable is a diagnostic tool that allows you to connect your Volkswagen, Audi, Seat, or Skoda vehicle to your computer and perform various tests and functions. In this article, we will show you how to install the drivers for the cable, how to configure the software, and how to use the cable to diagnose your vehicle.


Download: https://urlgoal.com/2w4vnN


What is VAG-COM 409.1 KKL USB Cable?




VAG-COM 409.1 KKL USB cable is a device that plugs into the 16-pin OBDII socket of your vehicle and connects to your computer via a USB port. It works with the VCDS-Lite software, which is a free version of the popular VCDS software from Ross-Tech. The cable and the software allow you to access various diagnostic functions and data of your vehicle, such as reading and clearing fault codes, viewing live data, performing basic settings, coding, and more.


However, there are some limitations of the VAG-COM 409.1 KKL USB cable and the VCDS-Lite software. First of all, they only support vehicles that use the ISO9141-2 or ISO14230-4 (KWP2000) protocols, which are mostly older models up to year 2004. They do not work on vehicles that use the CAN-BUS protocol, which are newer models from year 2005 onwards. Secondly, the VCDS-Lite software is a free version that has some features disabled or restricted. For example, you can only scan up to 3 control modules at a time, you cannot save or print any data, and you cannot access some advanced functions. To unlock these features, you need to pay $97 to upgrade to the full version of VCDS software from Ross-Tech.


Therefore, if you have a newer vehicle that uses the CAN-BUS protocol, or if you want to access more features and functions of your vehicle, we recommend you to get the complete VAG-COM 2021 cable with original, unlocked and full version of VCDS software from Ross-Tech. This cable supports all protocols and models of VAG vehicles, and has no limitations on the software.


How to Install VAG-COM 409.1 KKL USB Cable Drivers on Windows?




To install the drivers for the VAG-COM 409.1 KKL USB cable on Windows, follow these steps:



  • Do not connect the cable to your computer yet.



  • Download the VAG-COM Driver Pack 1 from this link.



  • Extract the zip file and run the setup.exe file.



  • Follow the instructions on the screen to install the drivers.



  • Connect the cable to your computer. Windows should detect it and install it automatically.



  • Go to Control Panel > System > Device Manager (or right-click on My Computer > Properties > Hardware > Device Manager).



  • Expand Other devices or Ports (COM & LPT), whichever contains USB Serial Port.



  • Right-click on USB Serial Port and select Properties.



  • Click on Port Settings tab and then click on Advanced button.



  • For COM Port Number, you must choose any number between 1-4. If it is already between 1-4, leave it as it is. If it is above 4, change it to any number between 1-4.



  • Click OK twice to save the settings.




The drivers for the VAG-COM 409.1 KKL USB cable are now installed on your computer.


How to Configure and Use VCDS-Lite Software with VAG-COM 409.1 KKL USB Cable?




To configure and use VCDS-Lite software with VAG-COM 409.1 KKL USB cable, follow these steps:



  • Download VCDS-Lite from this link.



  • Extract the zip file and run the VCDS-Lite.exe file.



  • Click on Options button.



  • Select the COM Port number that you assigned to the cable in the previous step.



  • Click on Test button. If everything is working, it should display Interface Status: Found!.



  • Click on Save button and then click on OK button.



  • Connect the other end of the cable to your vehicle's OBDII socket. Turn on the ignition, but do not start the engine.



  • Click on Select button on the main screen of VCDS-Lite.



  • Select the control module that you want to scan or access from the list. You can only select up to 3 modules at a time with the free version of VCDS-Lite.



  • Click on Open button. The software will communicate with the module and display its information and functions.



  • You can now perform various diagnostic tasks, such as reading and clearing fault codes, viewing live data, performing basic settings, coding, and more. Refer to the VCDS-Lite manual for more details on how to use the software.




You have now configured and used VCDS-Lite software with VAG-COM 409.1 KKL USB cable to diagnose your vehicle.


Conclusion




VAG-COM 409.1 KKL USB cable is a useful tool for diagnosing older VAG vehicles that use the ISO9141-2 or ISO14230-4 (KWP2000) protocols. However, it has some limitations on the software and the supported models. If you have a newer vehicle that uses the CAN-BUS protocol, or if you want to access more features and functions of your vehicle, we recommend you to get the complete VAG-COM 2021 cable with original, unlocked and full version of VCDS software from Ross-Tech. This cable supports all protocols and models of VAG vehicles, and has no limitations on the software.


We hope this article has helped you to install and use VAG-COM 409.1 KKL USB cable on Windows. If you have any questions or comments, please feel free to leave them below.


Om

Welcome to the group! You can connect with other members, ge...
Logga - Sturarna genomskinlig (TIFF).tif
bottom of page